UN Numbers, CAS Numbers and HS Codes for Chemical Shipments

“Same caustic soda as last time, only this time it comes in solution. Can we repeat the order?” Imagine that message landing on the desk of a buyer at a Ukrainian factory. The supplier is offering a familiar chemical. The warehouse, though, is expecting bags of flakes, and the saved freight booking still carries the UN number for the solid. One click on “reorder” would send last month’s instructions to the carrier.
Three identifiers can help the buyer sort this out. The CAS number identifies the substance in the product. The UN number identifies the entry under which the dangerous goods travel. The customs commodity code tells the importer how to classify the goods at the border. For this shipment, the full code comes from Ukraine’s tariff classification, known as UKT ZED.
What the buyer can learn from a CAS number
The order might say caustic soda, the specification sodium hydroxide, and the factory’s purchasing system NaOH. CAS Registry Number 1310-73-2 tells the buyer that all three refer to sodium hydroxide. The Chemical Abstracts Service assigns this number. The manufacturer’s specification gives the purity or concentration of the grade on offer.
Suppose the production manager needs three tonnes of NaOH on a 100% basis. If the supplier offers a 30% solution by weight, the shipment must contain ten tonnes of solution. If the buyer orders just “three tonnes of solution”, the factory will receive only 900 kg of NaOH. The CAS number is correct on either order. For the carrier, ten tonnes is the net weight of the solution. If the supplier ships it in IBCs, their tare weight has to be accounted for separately.
What does the buyer need to know? | Where to find the answer |
|---|---|
Which substance are we buying, and how much of it? | The CAS number in section 3 of the safety data sheet (SDS) and the mass fraction in the specification for the product ordered. |
What will the truck collect? | Section 14 of the SDS for the road leg, plus the consignor’s confirmation of the weight, packaging and loading method. |
What will the importer declare? | The goods description as supplied, the technical particulars and the corresponding Ukrainian tariff entry. |
Why switching from flakes to solution changes the UN number
The factory’s last booking said UN 1823. That entry covers solid sodium hydroxide, including flakes. The 30% aqueous solution in this example travels under UN 1824. Both goods fall in Class 8 for corrosive substances. A dispatcher who checks only the class will miss the change. The proper shipping names make the difference clear. One specifies solid sodium hydroxide and the other specifies sodium hydroxide solution.
A UN number has four digits and points to an entry in the dangerous goods list. An entry can cover a single substance or a group of products with shared properties. A separate question still matters when booking caustic soda transport. Will the supplier hand over those ten tonnes in intermediate bulk containers (IBCs), or will it load a road tanker? The same solution can have the same UN number either way. The factory needs to know whether to prepare a receiving tank and unloading connection or reserve space to unload the IBCs.
What a correct UN number can still leave open
ReAgent’s safety data sheet for its 30% sodium hydroxide solution by weight gives UN 1824, Class 8 and packing group II. Carl Roth’s sheet for its 0.1 mol/l laboratory solution, product K020, gives the same UN 1824 and Class 8, with packing group III. The packing group indicates the degree of danger for transport and affects which packaging is permitted. Matching the UN number is not grounds for copying the packing group from a different formulation.
Does every sodium hydroxide solution have a UN number? Merck lists its 0.02 mol/l laboratory solution, product 109142, as not regulated as dangerous goods under ADR/RID. That is a finding about a specific product. If the transport field on the sheet you receive is blank, ask the consignor to confirm how that formulation is classified. When arranging dangerous goods transport by road, use the confirmed ADR particulars for the road leg.
Why the customs broker asks about salt in caustic soda
Back at the factory, the carrier now knows what to collect. The supplier has entered HS 2815 12 on the invoice. The buyer forwards it to the broker and gets a seemingly unrelated question. How was the solution manufactured, and how much sodium chloride does it contain?
The reason lies in the tariff. The first six digits identify an international Harmonized System (HS) subheading. Customs uses the full commodity code to check the duty rate and any product-specific controls. For customs clearance in Ukraine, the declarant needs the ten-digit Ukrainian commodity code. Solid sodium hydroxide falls under 2815 11 00 00. For the aqueous solution, the Ukrainian tariff divides subheading 2815 12 into two entries.
Ukrainian commodity code | Which product the entry describes |
|---|---|
2815 12 00 10 | A solution produced by the diaphragm process and containing at least 2% sodium chloride (NaCl) by weight. |
2815 12 00 90 | Other aqueous sodium hydroxide solutions falling within this subheading. |
Suppose the producer confirms in the specification that it uses the membrane process and that NaCl content is at most 0.1% by weight. On those facts, 2815 12 00 90 fits the shipment. The purchase order’s “30% NaOH” could never settle that question. It tells the buyer how much alkali the factory is buying. To check the Ukrainian tariff entry, the broker also needs to consider the manufacturing process and the salt content. Padding the supplier’s six-digit HS code with zeros would produce the wrong result.
Can you look up a CAS number or a customs code from a UN number?
A supplier describes a solvent shipment as “xylene, UN 1307”. Both ortho-xylene and meta-xylene travel under this number. They are isomers, with the same molecular formula but different arrangements of groups within the molecule. Pure ortho-xylene has CAS 95-47-6 and Ukrainian commodity code 2902 41 00 00. For pure meta-xylene the corresponding numbers are 108-38-3 and 2902 42 00 00. The freight description gives the carrier an entry to check. Only the specification for the ordered isomer will tell the buyer which of those products the supplier intends to load.
What several CAS numbers on one safety data sheet mean
A machine cleaner can have one trade name and several CAS numbers in section 3 of its SDS. Each number in the list belongs to the substance named alongside it. A CAS entry for xylene, for instance, confirms the presence of that ingredient. It is insufficient grounds for declaring the canister of cleaner as pure xylene or assigning it UN 1307.
Start by matching the product reference on the canister to the identifier in section 1. Then find the transport particulars in section 14 for the formulation handed to the carrier. This matters when a factory buys a concentrate and dilutes it on site. A document for the diluted, ready-to-use cleaner can describe a product with quite different properties. If the broker needs more detail on the cleaner’s composition or function, request it from the manufacturer. Section 3 may disclose only the ingredients that must be listed. The guide to reading a chemical safety data sheet explains where each set of particulars belongs.
What to change before the truck is booked
For the factory’s caustic soda order, lay three records side by side. The purchase order should show 10 tonnes of solution at 30% NaOH by weight, equivalent to 3 tonnes of NaOH. In the freight booking, the consignor confirms UN 1824, the full proper shipping name, class and packing group from the SDS for this grade, and how the goods will be loaded. The declarant keeps the producer’s specification showing the manufacturing process and salt content used to select the tariff entry.
If the buyer has only last month’s sheet for flakes, one short message can clear things up. “Please confirm that you will ship ten tonnes of 30% aqueous sodium hydroxide by weight. Please send the current SDS and specification for the product ordered, and confirm the loading method, manufacturing process and NaCl content by weight.” The reply gives the warehouse a load it can prepare for, the carrier a product it can identify and the broker evidence for the customs declaration.











