How to create a GMR for multiple export declarations at Dover

A driver collects four pallets of pump spares in Birmingham and two pallets of industrial valves in Coventry. Both consignments are bound for Ukraine via France. The Dover–Calais ferry is booked. The first supplier sends a copy of its export declaration. The second forwards an email headed “Your MRN”. What does the driver actually present at check-in?
At a crossing that uses the UK’s Goods Vehicle Movement Service (GVMS), the haulier brings the relevant customs references for the entire load together under one Goods Movement Reference (GMR). It covers one vehicle movement across the border. For road freight from Great Britain to Ukraine via France, this is the British leg of the journey. Here is how it works for an EU-bound lorry using Dover’s freight ferry terminal.
Which references should each supplier send?
A UK export declaration can carry both a DUCR and an MRN. Ask two brokers for “the customs number” and they may send different things. For each consignment, ask which procedure the goods are moving under and which reference the haulier needs for the GMR.
Reference | How it is used on this journey |
|---|---|
DUCR | The Declaration Unique Consignment Reference on a UK export declaration. For standard exports declared through the Customs Declaration Service (CDS), enter all the relevant DUCRs in the GMR. |
MRN | The Movement Reference Number for a particular customs operation. For instance, a transit MRN from a Transit Accompanying Document (TAD) can be entered in a GMR where the rules for that movement allow it. Establish which document the number belongs to. |
GMR | The reference the driver presents to the ferry operator for the whole load on this crossing. The ferry booking reference serves a separate purpose. It identifies the reservation. |
On a groupage shipment, the number of pallets, invoices and declarations can all differ. In our example each supplier has filed one standard export declaration. The six pallets therefore travel under two DUCRs linked to one GMR.
From the last collection to check-in at Dover
1. Confirm what is on the trailer. After the final collection, the dispatcher checks the pallet count with the driver. For each consignment, record the supplier, invoice, actual pallet count, declarant’s contact details, reference type and reference number. If the lorry loads at a freight consolidation warehouse, agree the final list there. It is much easier to establish whether the two Coventry pallets made it onto this trailer while the warehouse team can still see the loading bay.
2. Get confirmation from both declarants. For the Dover Eastern Docks ferry crossing in this example, the export declarations are submitted as “arrived”. The declarant can check whether customs has granted Permission to Progress (P2P) and relay any inspection instructions. Ask each broker for the DUCR of the accepted declaration and its current status. An email saying “declaration submitted” still leaves the dispatcher without the information needed to send the driver to check-in.
3. Bring both consignments into the same GMR. The haulier or its appointed representative manages the record in GVMS. Select the direction and crossing, then enter both DUCRs. If the driver accompanies the vehicle on the ferry, enter the registration number of the tractor unit. For an unaccompanied movement, enter the trailer number or container reference as appropriate to the unit travelling.
4. Check the response and brief the driver. GVMS checks each DUCR. If it flags the Coventry consignment, send that broker the precise reference and the system message. Before sending the driver to routine ferry check-in at Dover, confirm that the GMR is Open and check the inspection instructions. If customs directs the driver to an inspection facility, they must attend before check-in. Give the driver the readable GMR barcode or reference number and a dispatcher’s contact number.
Read the GVMS response alongside the load list. A Not finalisable status means the record needs attention before it can be used at check-in. Once it is Open, compare its entries with the final warehouse tally. GVMS can check the references entered. It cannot see two extra pallets on the trailer if their DUCR is still sitting in the broker’s email.
What if both Coventry pallets stayed behind? Have the warehouse and driver confirm that only the four Birmingham pallets are on board. Tell the second declarant that their consignment has been deferred, agree what happens to its declaration, and update the existing GMR before check-in. If all six pallets are on board, deleting the second DUCR would leave cargo unaccounted for. Resolve the issue against that consignment while it is still possible to amend the record.
A broker replaced one MRN after the GMR was created. What should we change before check-in?
Both consignments are on board when the Coventry broker emails a new MRN. Before editing the GMR, ask which consignment this affects, which declaration was replaced, which reference has been superseded and which reference is now valid for the GMR. There are three common ways to interpret that email.
The UK export declaration has a new MRN. Check the DUCR with the declarant. If the DUCR still identifies the current declaration, confirm P2P and check the GVMS response. A change to the export MRN alone does not require a different DUCR in the GMR. If the replacement declaration has a new DUCR, remove the superseded reference, enter the confirmed replacement and check the GMR again.
A transit MRN has changed. Establish whether the GMR contains the MRN from the TAD. For example, this can apply to non-excise exports leaving through an arrived export location where an authorised consignor with the necessary authorisations started the transit. If the GMR uses the superseded transit MRN, get confirmation from the declarant that the goods have been released for transit against the replacement. Update the existing GMR and check the result. Where the export uses DUCRs, verify those references. If several agents handle the load, agree who will confirm each reference when arranging customs brokerage.
The new number belongs to an EU entry document. Pass the change to whoever is handling the EU side. If the British references remain valid and the load is unchanged, the change on the EU side alone does not call for an amendment to the GMR. Our guide to ICS2 and entry summary declarations for road freight explains which data the EU requires ahead of entry.
Two more questions before the ferry
Do we need a second GMR after a correction? Before check-in, amend the existing record for that crossing. Once you have checked it, confirm with the driver which GMR to present. If the status is already Checked In, the haulier can no longer edit it. Contact the ferry operator and declarant before boarding.
What if only the tractor unit changes? For an accompanied crossing, check that the GMR shows the registration of the unit that will board and notify the ferry operator in line with the booking arrangements. A change of tractor unit alone does not affect either consignment’s DUCR.








